CR4212-i8V4 Server
Category:
Keywords:
Product Features
| ● Support 2 fourth-generation/fifth-generation Intel® Xeon® scalable processors, TDP 350W | ● 12 front-mounted 2.5/3.5 hot-swappable hard drive bays , support 4 NVMe + 8 SAS/SATA |
| ● 32 DDR5 DIMM slots , Highest 5600MHz supports RDIMM and 3DS RDIMM. | ● Built-in 8 An intelligent system fan, N+1 redundant fans, supporting hot-swappable functionality. |
| ● Supports up to 8/10 dual-width GPU cards, with each card supporting a maximum power consumption of 600W. | ● Standard configuration 4 x 2700W power modules, Support 2 + 2, 3 + 1 redundancy |
Product Specifications
Merit Can | Product Parameters | |
Model | CR4212-i8V4 | |
Processor | Support 2 fourth-generation/fifth-generation Intel® Xeon® Scalable processors, TDP 350W | |
Chipset | Intel® C741 | |
Memory | 32 DDR5 DIMM slots Highest 5600MHz supports RDIMM and 3DS RDIMM, with maximum memory support up to 8TB. Single capacity 16GB, 32GB, 64GB, 128GB, 256GB | |
Storage controller | PCH/RSTe (NVMe) & SAS HBA/RAID Card (SAS/SATA) | |
GPU Expansion Mode | Direct version | Switch version |
Number of GPUs | Support 8/10 double-wide GPUs | Support 8/10 double-wide GPUs |
PCIe expansion | Supports up to 12 PCIe standard slots (including 1 optional built-in expansion slot) Support 8 PCIe 5.0 x16 + 4 PCIe 5.0 x8 | Supports up to 14 PCIe standard slots (including one optional built-in expansion slot). 14 PCIe 5.0 x16 + 2 PCIe 5.0 x8 |
Storage | Support 3 x4 interfaces (SlimSAS); Built-in optional 2 SATA or 1 PCIe M.2 Standard configuration includes 12 hot-swappable 2.5/3.5-inch hard drive bays. , support 4 NVMe + 8 SAS/SATA Supports up to 24 hot-swappable 2.5/3.5 hard drive bays. , optional support SAS/SATA/NVME | |
Port | Front panel: 1 Power Switch/LED, 1 UID button/LED, 1 HDD LED, 1 ALARM LED, 1 LAN LED, 2 USB 3.0 ports Rear panel: 1 VGA, 1 RJ45 management network port, 2 USB 3.0 ports, 1 UID Switch/LED | |
Network | Optional support 1 OCP3.0 network card, optional PCIe 5.0 x8 or x16 Optional 4×1GbE / 2×10Gb SFP+ / 4×10Gb SFP+ / 2×25Gb SFP28, supporting other network interface cards compliant with the OCP 3.0 standard. | |
Management | The board features the onboard BMC management chip AST2600, which supports remote management and control, such as: IPMI 2.0, KVM over IP, SOL, SNMP, and others; The original manufacturer’s management software can simultaneously deploy multiple hosts or perform specific deployments according to a scheduled timeline, and it can monitor servers. CPU, memory, and other resource utilization; batch log collection, etc.; The data center management platform enables remote, multi-functional, and advanced management. | |
Power supply | Standard configuration 4 x 2700W power modules, Support 2 + 2, 3 + 1 redundancy Optional configuration with 4 power supply modules rated at 2000W / 2400W / 2700W / 3200W. | |
System fan | 8 system fans for the 8056, N+1 redundant fans, hot-swappable support | |
Size | Rack-mount 4U, 447mm wide × 175mm high × 880mm deep | |
Environmental parameters | Operating temperature: 10°C to 35°C; Non-operating temperature: -40°C to 70°C Non-operating relative humidity: 5% to 90% (no condensation) | |
Operating system support | Microsoft Windows Server, Microsoft Hyper-V Server. Red Hat Enterprise Linux. SUSE Linux Enterprise Server. CentOS, Ubuntu, Fedora. Solaris, Oracle Linux. FreeBSD. VMware ESXi% Citrix XenServer Please consult the sales representative for specific versions. | |
Relevant materials
Related products
Welcome to leave a message for inquiries.